|
|
For contact info or to visit our
Customer Service section
Click Here
|
|
*Special and Custom Orders
Please
examine the product details closely and order color swatches to be sure
you are ordering the product and color you need as Special & Custom Orders will
require payment in advance and are non-refundable and non-returnable once the order is placed. Production time can be as long as 3-6 weeks. |
|
|
|
|
FAQ: Will this seat
belt fit in my vehicle?
Our seat belts are a
universal product and with little or no modification will work in
any vehicle. Generally, if you are replacing a seat belt with one of the same
style, little or no modification should be necessary. Because our seatbelts are not specific to individual make and model vehicles and are an aftermarket product and because of liability limitations we are not able to offer installation advice and cannot provide compatibility for specific vehicle make and model. When installing a seat belt into a vehicle that previously did not have them or upgrading a vehicle with a different style seat belt, retrofitting may be required. If anchorage points are not present, they must be safely added before installation. All US passenger cars,
beginning with 1962 models, have seat belt anchorages for at least
two lap belts in the front seat. Since January 1968, vehicle
manufacturers have been required to install lap belt anchorages for
each front and rear seating position and upper torso belt anchorages
at each forward facing outboard seating position. On January 1st.
1972, this same requirement became effective for trucks. In 1986, GM began phasing in 3 point (lap belts with shoulder restraints) for the rear outboard seats of their vehicles and the other major U.S. manufacturers followed suit over the next 3-4 years. |
|
|
 |
|
|
|
©
Copyright 2007. GotBelts.com. All rights reserved. |
|
Gotbelts.com SeatBeltPros.com Simpleline assumes no
responsibility for either proper or improper installation of any products sold
on this site. Proper installation is the sole responsibility of
the installer. No other warranty is expressed or implied.
All Statements, technical
advice and recommendations contained herein are based on tests believed to be
reliable, but the accuracy thereof is not guaranteed, and the following is made
in lieu of all warranties, expressed or implied: seller's and manufacturer's
only obligation shall be to replace the quantity of product proved to be
defective. Neither seller nor manufacturer shall be liable for any injury, loss
or damage, direct or consequential, arising out of the use of or the inability
to use the product. Before using, user shall determine the suitability of the
product for his intended use, and user assumes all risk and liability whatsoever
in connection therewith. No statement or recommendation not contained herein
shall have any force or effect unless in an agreement signed by officers of
seller and manufacturer.
|
|
